1. Group SMS, landline
2. Ademco contact ID through GSM
3. Programme the phone numbers directly on the panel
4. LCD and blue back-up light, all the setting can be viewed directly on the LCD
5. 85 event log about arming,
disarming, and alarming. When
alarming, the time, zone number
and detector
number could be
viewable on the LCD
6. When working with Center
Station, the panel can set to
speak: after alarm date
transmitted, the center station
operator can
speak directly with the user to
make sure whether it is a real
alarm or just simply a false
alarm,
when not
working with Center
Station, when the panel alarms
and auto dial, the user can
listen in, speak,
sound siren,
disarm remotely from user’s
phone.
7. 6 groups timed auto arm/disarm, Away/Stay arm optional
8. Every zone can be programmed
seperately, it can set to be:
watchdog zone, exit/entry delay,
24 hours zone,
sounder/silent when alarming,
armed/part armed zone. e.g. we
can set zone 3 with delay timer,
zone 4
without delay, or zone 2
is 24 hours zone, while zone 3
is normal zone, etc.
9. Every detector can be set to
doorbell when disarmed, every
detector can be set to locally
alarm
(do not dial
out) when triggered in disarmed
mode
10. every remote can be set to request assistance siren on/off
11. Siren could be set to sound when away arming
12. When using our pir, ceiling
mount pir, directional pir and
vibration sensor, these sensors
can display low
voltage on the LCD and should
beep
13. Every zone can be seperately armed/disarmed (24 hours zone can not seperately disarmed)
14. Unique watchdog function,
monitor the old, patient or
important place. When one zone
is set to be
watchdog zone, during a
programmed time, if the sensor
not triggered, then the panel
would alarm
15. Built in rechargable battery
which backs up 12 hour when main
fails; Built-in siren, and timer
Ic,
the time keeps right after power
off
16. Remote control, listen in, speak, arm, disarm, or turn on/off the siren from a remote phone